Amfeltec Corp. Flexible MiniPCI Express to PCI Bus Adapter Uživatelský manuál stáhnout pdf (Strana 11)

Installation

5 Installation

5.1 Hardware

Following steps provide the exact sequence need to be followed in order to properly install the

MiniPCI to PCI Bus Adapter from AMFELTEC Corp.:

• Turn OFF host computer before installation.

• Remove the chassis cover from host computer.

• Insert Flexible PCI Express Cables to the connectors on the MiniPCI Interface board and on

the PCI Backplane.

• Install the Interface board into the motherboard MiniPCI slot. Place and retain PCI Backplane

inside the chassis. Connect power for the PCI Backplane.

• Plug-in expansion add-in boards into PCI Backplane.

Now, you can power-up the host computer.

BE SURE THAT TWO LEDs on the PCI Backplane: D2 (GREEN) IS ON and D1

(RED) IS OFF! (Upstream Link status and RESET signal).

BE SURE THAT GREEN LED D4 and BLUE LED D3 ARE ON!

(Downstream Link status and PCI Backplane PRESENT)

Flexible Mini PCI to PCI Bus Adapter, Hardware Manual, Revision 1.0

Page 11

1 2 ... 6 7 8 9 10 11 12 13

Žádné komentáře

Amfeltec Corp. Flexible MiniPCI Express to PCI Bus Adapter Uživatelský manuál Strana 11