Amfeltec Corp. Flexible MiniPCI Express to PCI Bus Adapter Uživatelský manuál stáhnout pdf (Strana 12)

Installation

5 Installation

5.1 Hardware

Following steps provide the exact sequence need to be followed in order to properly install the

Flexible MiniPCI Express to PCI Bus Adapter from AMFELTEC Corp.:

• Turn OFF host computer before installation.

• Remove the chassis cover from host computer.

• Insert Flexible PCI Express Cables to the connectors on the MiniPCI Express Interface board

and on the PCI Backplane board.

• Install the Interface board into the motherboard MiniPCI Express slot. Place and retain PCI

Backplane inside the chassis. Connect power for the PCI Backplane.

• Plug-in expansion add-in boards into PCI Backplane.

Now, you can power-up the host computer.

BE SURE THAT BLUE LEDs D5 or D6 ARE ON!

(PCI backplane is “PRESENT”)

Flexible MiniPCI Express to PCI Bus Adapter, Hardware Manual, Revision 1.0

Page 8

1 2 ... 7 8 9 10 11 12 13 14

Žádné komentáře

Amfeltec Corp. Flexible MiniPCI Express to PCI Bus Adapter Uživatelský manuál Strana 12